I don't thing anything other than the modem sync speeds has been upgraded on most exchanges.

Will just have to be patient till 1st.

Looking closer, my settings are IPoA not PPPoE as yours are. there may be different types of DSLAM in use.

Interesting. I have noticed that new users in my area get the DSL light and Internet light on on their modems. I do not get the internet light.

On a speedtouch the PPP bit remains in the connecting....... state, while the one below IP internet connects. Shoing my IP address, gateway etc

So there looks like 2 sets of settings in use. PPPoE and IPoA

Requiring different ATM virtual channel numbers.
IPoA needs 8,35
PPPoE needs 8.36 8.37 8.38 8.42

Interesting. Your VPI,VCI channels are slightly different to mine, when I use the original Speedtouch modem I get 8.35 8.36 8.37 8.38 as the channels

Click on 1483 Bridged IP LLC

You just cant have Multi VCI's. You only need on efor the internet. 8,35

Somthing strange happened.

Upload 320000
Download 1184000

Whats going on here?

Another line I have, 448000 & 2436000

Neither work at 2Meg download, even after logging out and back in again.

Rubbish!!!!!!!! So why do CYTA offer a 1.70 discount per month if you use your OWN router!!!!!!!!!!!!!!!

I am using a UK router, NOT the CYTA Speedtouch. In fact a Draytek 2800VGi with built in Voice over IP.

Settings you need

You need a router than conform to RFC 1483 MPoA
MPoA Channel 1 (Internet Traffic)

VPI - 8
VCI - 35
Modulation G.DMT or ADSL2+ depending on your DSLAM Type. (Or leave on Auto)
Encapsulation 1483 Bridged IP LLC
Protocol MPoA

If you have Mi-Vision
MPoA Ch2 - VPI 8, VCI 36
MPoA Ch3 - VPI 8, VCI 37
MPoA CH4 - VPI 8, VCI 38

These extra channels isolate the TV data from internet, on the ADSL connection, on your Ethernet there all mixed together.

WHat you have just configured is Triple Play in CYTA terminology

Still nothing.

There doing a few each day on each exchange. The lady told me its an automated process.

CYTA DSL settings are different to most Internet providers. Without getting Technical, its hard. Does your modem have an auto detect line type setting?? Otherwise I can give you the settings.

Are you aware of the terms MVC, PVC channels??

I have a friend in work, who has already been upgraded. His downloads jumped from 100KBs to 220 on Monday. So from this data, he is now on 2MB product. Also his upload has gone up too.

He is in Vrysoulles.

However so am I, and I haven't got a speed boost yet. But I believe there are 2 DSLAM's at our exchange

Lets hope! An xipnisw mia mera kai exw 2M for free tote tha eimai poli happy!! 

Whats having 24MBs in greece got to do with 2M in Cyprus?

From 512 and 1028 home products.

Believe it when I see it though.

Saying that we were promised Mi-Vision in March, and sure enough we have had a Mini D-Slam installed and we can not have it.

We had a Cyta line installed this week at work. When i was speaking with the engineer he said that the 2M upgrade is due end of March. It will be automatic upgrade and no extra charge. Hmmmmm free upgrade, not Cyprus. Anyone heard any more info on the long awaited 2M upgrade on I-Choice

Attached is the setting required fopr amy Multi PVC router to run MiVision.

You have to setup extra ATM settings. If you understand how to configure multiple VPI/VCI them i have the document from a cyta tech listing the correct settings to get ANY router working.

Cyta provide a Speedtouch 585v6. This is a 4 port modem/router/switch.

I have replaced it with the draytek, so I have directly replaced the speedtouch with a draytek.